dr croog

I haven't done much bike wise over the winter but I did get the tail lights for the 1100 started

Two LED stop/tail lights are going to be used as stop/tail lights and turn signals

They will be mounted to the back of the shocks

The lights have a large plug on the back which is in the way since I want to mount the lights flat against the shocks. I ground the plug off down to the circuit board and soldered 3 wires on. This was all covered with Bondo Glass flush with the back of the light, with the wires exiting to the side

The lights will be faired into the shocks with Bondo Glass so they don't look like the ghetto Princess Auto lights that they are.